Vacuum Diaphragm Rod
Starion
1) Disconnect vacuum hose at vacuum diaphragm. Remove
diaphragm from transmission case. Using depth gauge, measure depth
"L". See Fig 1.
2) Ensure vacuum throttle valve is pushed into valve body
as far as possible. Select correct length rod to adjust. See VACUUM
DIAPHRAGM ROD SELECTION table.
VACUUM DIAPHRAGM ROD SELECTION
| Depth "L" In. (mm) | Rod Length In. (mm) | Part No. |
|---|---|---|
| Under 1.006 (25.55) | 1.142 (29.0) | MD610614 |
| 1.010-1.026 (25.65-26.05) | 1.16 (29.5) | MD610615 |
| 1.030-1.045 (26.15-26.55) | 1.18 (3.0) | MD610616 |
| 1.050-1.065 (26.65-27.05) | 1.20 (30.5) | MD610617 |
| Over 1.069 (27.15) | 1.22 (31.0) | MD610618 |