FixVault
Home › Mitsubishi › 1990 › Montero Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics › Self-Diagnostic System › Clearing Diagnostic Trouble Codes › If Multi-Use Tester Is Used

If Multi-Use Tester Is Used

  1. Connect multi-use tester to the diagnosis connector.
  2. Select "4. SPECIAL TEST" of the multi-use tester's function select menu.
  3. Then select item No. 5. "ERASE DIAG".
  4. When "ERASE DIAG. CODE?" is displayed, press YES key.
  5. Input ID code 19.
  6. When "FINISHED ERASING DIAG. CODE" is displayed, press CLEAR key.
  7. Read out self-diagnosis output, and ensure that correct code is being output.
About FixVault