FixVault
Home › Mitsubishi › 1990 › Van LS › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Diagnostic Tests › Input Check › Code Call-Out

Code Call-Out

  1. The display commences when one or the other of the following conditions occurs, and stops when the main switch is switched OFF.
    • When the main switch is switched ON while the SET switch and the RESUME switches are ON.
    • When the main switch is switched ON while the SET switch is ON, and then, within one second thereafter, the RESUME switch is switched ON.
  2. This procedure makes it possible to display the results of the input check.
About FixVault