Using Scan Tester
WARNING: This page is about a different car, the 1992 Mitsubishi Precis, 1992 Mitsubishi Galant, and 1992 Mitsubishi Diamante. However, it is still accessible from the selected car via links, so may be relevant.
- Before entering on-board diagnostics, refer to PRETEST INSPECTION . Turn ignition switch to OFF position. Locate self-diagnostic connector, next to fuse block. Connect power source terminal of scan tester to cigarette lighter socket.
- Connect scan tester to self-diagnostic connector. Turn ignition on. Read and record scan tester self-diagnosis output. Perform necessary repair. See FAULT CODES .