Dynamic Damper
Dynamic damper must be properly positioned on axle shaft. Position damper so proper distance exists between damper and end of boot with axle shaft in a straight position. See Fig 1 . Distance must be within specification. See the DYNAMIC DAMPER INSTALLATION SPECIFICATIONS table.
DYNAMIC DAMPER INSTALLATION SPECIFICATIONS
| Application | (1) Damper-To-Boot End Distance In. (mm) | |||
|---|---|---|---|---|
| Mirage | ||||
| 1.5L | 17.1-17.3 (434-439) | |||
| 1.6L | 5.5-5.7 (140-145) | |||
|
||||