Ignition Coil Resistance

Using a DVOM, measure primary coil resistance between terminal No. 3 (power terminal) and each individual coil terminal. See Fig 1 . To check secondary coil resistance, measure resistance between towers of each individual coil.

Replace coil if primary and secondary coil resistances are not within specification. See IGNITION COIL RESISTANCE table.

IGNITION COIL RESISTANCE (DOHC) - Ohms @ 68°F (20°C)

Application	Primary	Secondary
3.0L	.67-.81	11,300-15,300

Fig 1: Ignition Coil Connector ID (DOHC)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.