Using Scan Tester
WARNING: This page is about a different car, the 1994 Mitsubishi 3000GT and 1994 Dodge Stealth. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to manufacturer's operation manual for instructions in use of scan tester. Before entering on-board diagnostics, see SERVICE PRECAUTIONS . Turn ignition switch to OFF position. Locate Data Link Connector (DLC), at lower right of steering column. Connect power source terminal of scan tester to cigarette lighter socket.
- Connect scan tester to DLC. Turn ignition switch to ON position. Read and record scan tester self-diagnostic output. Perform necessary repair(s). See TROUBLE CODES .