Pinion Rotating Force
NOTE:
Pinion rotating force procedure is performed with rack and pinion assembly off vehicle and supported in soft-jawed vise.
Using an adapter and torque wrench, measure rotating force while turning pinion gear through one complete rotation within4-6 seconds. Refer to the PINION ROTATING FORCE SPECIFICATIONS table and the PINION ROTATING FORCE ADAPTER table. If rotating force is not within specification, adjust end plug (rack support cover), and recheck rotating force. Tighten locking nut to 36-51 ft. lbs. (49-69 N.m).
PINION ROTATING FORCE SPECIFICATIONS
| Application | INCH Lbs. (N.m) |
|---|---|
| Colt Vista, Expo, Summit Wagon | 5-11 (.6-1.3) |
PINION ROTATING FORCE ADAPTER
| Application | Tool No. |
|---|---|
| Colt Vista, Expo, Summit Wagon | CT-1108 Or MB991006 |