Power Mirror Switch
Remove mirror switch. Using ohmmeter, check continuity of switch. See POWER MIRROR SWITCH CONTINUITY CHART . SeeFig 1 . Replace switch as necessary if switch continuity is not as specified.
POWER MIRROR SWITCH CONTINUITY CHART
| Switch Position | (1) Check Continuity Between | |||
|---|---|---|---|---|
| Left Side | ||||
| UP | Pins 4 & 8; Pins 6 & 7 | |||
| DOWN | Pins 4 & 7; Pins 6 & 8 | |||
| LEFT | Pins 3 & 6; Pins 4 & 7 | |||
| RIGHT | Pins 3 & 4; Pins 6 & 7 | |||
| Right Side | ||||
| UP | Pins 2 & 4; Pins 6 & 7 | |||
| DOWN | Pins 2 & 6; Pins 4 & 7 | |||
| LEFT | Pins 4 & 7; Pins 6 & 9 | |||
| RIGHT | Pins 4 & 9; Pins 6 & 7 | |||
|
||||