Checking Automatic Stop
- Operate wiper motor at low speed. See CHECKING WIPER MOTOR OPERATION. Disconnect battery voltage to stop motor in any position except park.
- Using a jumper wire, connect terminals indicated. See AUTOMATIC STOP CHECK table. See Figure . Connect 12 volts to terminal indicated in table, and ground wiper motor bracket. Ensure motor parks wiper arm.
AUTOMATIC STOP CHECK
| Model | Jumper Wire Terminals No. | Apply Voltage To Terminal No. |
|---|---|---|
| Precis | 5 & 6 | 1 |
| - Attach negative battery lead to terminal No. 3. | ||