FixVault
Home › Mitsubishi › 1997 › Diamante LS › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Multiplex Control System › Diagnostic Tests › Code 24

Code 24

  1. Check connectors between dash harness and ETACS-ECU harness. Repair as necessary. Disconnect ETACS-ECU harness connector.
  2. Check continuity between ground and ETACS-ECU harness-side connector terminal No. 64 (Black wire). If continuity is present, replace ETACS-ECU. If continuity is not present, check circuit between ETACS-ECU and ground. See WIRING DIAGRAMS  . Repair as necessary.
About FixVault