FixVault
Home › Mitsubishi › 1997 › Montero LS › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System - 4WD › Self-Diagnostic System › Clearing DTCS › Using Scan Tool

Using Scan Tool

  1. Turn ignition switch off, connect Multi-Use Tester II (MUT II) to Data Link Connector (DLC). See Figure .
  2. Turn ignition switch on. Refer to MUT II manufacturer's instructions for specific DTC clearing procedure. Turn ignition switch off. Disconnect MUT II.
About FixVault