Ignition Coil Resistance

Measure primary coil resistance between terminal No. 1 (power terminal) and each individual coil terminal using a DVOM. See Fig 1 . To check secondary coil resistance, measure resistance between towers of each individual coil.

Fig 1: Identifying Ignition Coil Connector Terminals (V6 - DIS)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Replace coil if primary and secondary coil resistances are not within specification. See IGNITION COIL RESISTANCE (V6) table.

IGNITION COIL RESISTANCE (V6) - Ohms @ 68°F (20°C)

Application	Primary	Secondary
(VIN M)	.74-90	20,100-27,300