Using Scan Tool
- Turn ignition off. Connect Multi-Use Tester II (MUT II) to Data Link Connector (DLC). See Fig 1
.
- Turn ignition on. ANTI-LOCK Warning light should come on as ABS goes into self-diagnostic mode. Read and record all Diagnostic Trouble Codes (DTCs) from ABS ECU memory. Refer to MUT II manufacturer's instructions for specific DTC retrieval procedure.
- After all DTCs have been retrieved and recorded, turn ignition off and disconnect MUT II. See ABS DTCS table and appropriate DTC under DIAGNOSTIC TESTS
for servicing procedure. After repairs, repeat RETRIEVING DTCS to confirm that failure has been corrected.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.