FixVault
Home › Mitsubishi › 1998 › Montero › Repair and Diagnosis › Engine Performance › System › Engine Controls - Tests W/Codes › Self-Diagnostic System › Entering On-Board Diagnostics › Using Scan Tool

Using Scan Tool

  1. Refer to manufacturer's operation manual for instructions in use of scan tool. Before entering on-board diagnostics, see SERVICE PRECAUTIONS . Locate Data Link Connector (DLC) under instrument panel, near steering column.
  2. Turn ignition switch to OFF position. Connect scan tool to DLC. Turn ignition switch to ON position. Read and record scan tool self-diagnostic output. Proceed to TROUBLE CODE DEFINITION .
About FixVault