Cruise Control Switch Test
Disconnect cruise control switch harness connector. Check continuity and voltage between switch terminals with switch in specified positions. See CRUISE CONTROL SWITCH TEST table. Replace as necessary.
CRUISE CONTROL SWITCH TEST
| Switch Position & Terminals No. | Condition | |
|---|---|---|
| Switch Off | No Continuity | |
| CANCEL (Switch On) | ||
| 2 & 3 | About Zero Ohms | |
| 2 & 3 | One Volt or Less | |
| RESUME (Switch On) | ||
| 2 & 3 | About 910 Ohms | |
| 2 & 3 | 2.8-3.2 Volts | |
| SET (Switch On) | ||
| 2 & 3 | About 220 Ohms | |
| 2 & 3 | 1.3-1.7 Volts | |
| Switch On | ||
| 1 & 2 | About 3900 Ohms | |
| 2 & 3 | 8.8-9.2 Volts | |