Auto-Cruise Control Setting

1. Switch ON the main switch.
2. Drive at the desired speed, above approximately 40 km/h (25 mph).
3. Push the auto-cruise control switch down. See Fig 1 .
NOTE: If the vehicle speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, the auto-cruise control will be cancelled.
4. Check to be sure that when the switch is released, the speed is the desired constant speed.

Fig 1: Setting Auto-Cruise Control Switch To COAST/SET

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.