Using Scan Tool
WARNING: This page is about a different car, the 2002 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Connect MUT II (MB991502) or equivalent scan tool and appropriate ROM pack to Data Link Connector (DLC). DLC is located under driver side of dash. See Fig 1 .
- Turn ignition on. Referring to scan tool manufacturer's instructions for specific DTC retrieval procedure use scan tool to retrieve and record all DTCs from ABS ECU memory. If any DTCs are retrieved, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITION .