Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Mitsubishi Montero Sport. However, it is still accessible from the selected car via links, so may be relevant.
G01120553
| ITEMS | SPECIFICATIONS |
|---|---|
| Differential carrier | |
| Cover bolt | 19 N.m (14 ft-lb) |
| Differential case bolt | 78 - 88 N.m (58 - 65 ft-lb) |
| Drain plug | 59 - 64 N.m (43 - 51 ft-lb) |
| Drive pinion self-locking nut | 216 N.m (159 ft-lb) |
| Filler plug | 49 N.m (36 ft-lb) |
| Front suspension crossmember nut | 98 - 118 N.m (72 - 87 ft-lb) |
| Front propeller shaft connection nut | 49 - 59 N.m (36 - 43 ft-lb) |
| Differential mount insulator assembly | 35 N.m (26 ft-lb) |
| Differential support bracket bolt | 69 N.m (51 ft-lb) |
| Differential support bracket nut | 44 N.m (32 ft-lb) |
| Dynamic damper nut | 22 N.m (16 ft-lb) |
| Bearing cap bolt | 54 - 64 N.m (40 - 47 ft-lb) |
| Drive shaft | |
| Driveshaft and inner shaft connection nut | 49 - 59 N.m (36 - 43 ft-lb) |
| Front axle hub | |
| ABS Rotor bolt | 22 N.m (16 ft-lb) |
| Brake disc and front hub assembly connection nut | 49 - 59 N.m (36 - 43 ft-lb) |
| Caliper assembly bolt | 88 N.m (65 ft-lb) |
| Hub cap bolt | 49 - 59 N.m (36 - 43 ft-lb) |
| Jam nut | 127 - 196 N.m → 0 N.m → 25 N.m (94 - 145 in-lb → 0 in-lb → 18 ft-lb) |
| Inner shaft | |
| Breather pipe bolt | 12 N.m (106 ft-lb) |
| Housing tube bolt | 88 N.m (65 ft-lb) |
| Differential mounting bracket nut | 93 N.m (69 ft-lb) |
| Heat protector bolt | 12 N.m (106 in-lb) |
| Knuckle | |
| Lower arm ball joint and knuckle connection nut | 118 - 177 N.m (87 - 131 ft-lb) |
| Shock absorber nut (lower) | 88 - 103 N.m (65 - 76 ft-lb) |
| Stabilizer bracket bolt | 12 N.m (106 in-lb) |
| Tie rod end connection nut | 44 N.m (32 ft-lb) |
| Upper arm ball joint and knuckle connection nut | 59 - 88 N.m (43 - 65 ft-lb) |