FixVault
Home › Mitsubishi › 2003 › Diamante LS › Repair and Diagnosis › External Pages › Different car › Section 35 (Keyless Entry System) › On-Vehicle Service › Enabling/Disabling The ANSWERBACK Function › Enabling/Disabling The Horn ANSWERBACK Function

Enabling/Disabling The Horn ANSWERBACK Function

WARNING: This page is about a different car, the 2003 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key.
  2. Push the "UNLOCK" switch while holding the "LOCK" switch pushed for four to ten seconds.
  3. If the "LOCK" switch and "UNLOCK" switch are released at the same time, the ETACS-ECU tone alarm will sound, indicting that the horn answerback function can be enabled or disabled.
    • Enable the horn answerback function: The ETACS-ECU tone alarm will sound once.
    • Disable the horn answerback function: The ETACS-ECU tone alarm will sound twice.
About FixVault