Automatic Trans: Overhaul
- General Description
- Special Tools
- Transaxle
- Oil Pump
- UNDERDRIVE Clutch And Input Shaft
- Reverse And Overdrive Clutch
- Planetary Carrier Assembly
- Low-Reverse Brake
- Second Brake
- Output Shaft
- Differential
- Valve Body
- Drive Shaft Oil Seal
- Specifications
- Fastener Tightening Specifications
- General Specifications
- Service Specifications
- Valve Body Spring Identification Table
- Snap Ring, Spacer, Thrust Washer, Thrust Race And Pressure Plate For Adjustment
- Thrust washer (For adjustment of input shaft end play)
- Snap ring (For adjustment of underdrive clutch and overdrive clutch end plays)
- Snap ring (For adjustment of low-reverse brake and second brake reaction plates and plays)
- Pressure plate (For adjustment of low-reverse brake end play)
- Pressure plate (For adjustment of second brake end play)
- Snap ring (For adjustment of reverse clutch end play)
- Snap ring (For adjustment of reverse clutch and overdrive clutch spring retainers end plays)
- Thrust race (For adjustment of underdrive sun gear end play)
- Spacer (For adjustment of output shaft preload)
- Spacer (For adjustment of differential case preload)
- Spacer (For adjustment of backlash between differential side gear and pinion)
- Sealants