FixVault
Home › Mitsubishi › 2003 › Eclipse GS, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 6 (On-Vehicle Service) › On-Vehicle Service › Transaxle Oil Level Check

Transaxle Oil Level Check

WARNING: This page is about a different variant/trim than selected.
  1. Remove the filler plug.
  2. Check that the oil level is up to the lower edge of the filler plug hole.
  3. Check that the oil is not noticeably dirty.
  4. Tighten the filler plug to the specified torque.

    Tightening torque: 32 +/- 2 N.m (24 +/- 1 ft-lb) 

    Fig 1: Checking Transaxle Oil Level
    G01932303Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
About FixVault