FixVault
Home › Mitsubishi › 2003 › Galant GTZ › Repair and Diagnosis (Single Page) › Accessories & Equipment › Accessories Control Systems › Immobilizer Systems › Programming › Key Id Register (Encrypted Code Registration) › Encrypted Code Registration (Without Scan Tool)

Encrypted Code Registration (Without Scan Tool)

NOTE: The engine can only be started using a properly registered key.
  1. Turn the ignition switch to the ON position using the first registered key (key "A"), and wait for 5 seconds.
  2. Within 30 seconds, remove the key.
  3. Within 7 seconds after the ignition switch has been turned to the LOCK (OFF), insert the second registered key (key "B") and turn the ignition switch to the ON position again. Now the theft-alarm indicator light should blink twice for one second. If it does not blink, key has failed to register. Return to step  1 .
  4. Turn ON key "B". Within 30 seconds, remove the key.
  5. Within 7 seconds after the ignition switch has been turned to the LOCK (OFF) position, turn the ignition switch to ON position by using a new key.
About FixVault