Door Lock Key Cylinder Switch
- Disconnect door lock key cylinder switch harness connector. With door lock key cylinder switch in LOCK position, continuity should be present between switch terminals No. 2 (Black wire) and No. 3 (Light Green/Black wire on driver's side; Red/Green wire on passenger's side). See WIRING DIAGRAMS .
- Turn door key cylinder switch to UNLOCK position. Continuity should be present between switch terminals No. 1 (Red wire on driver's side; Blue wire on passenger's side) and No. 2 (Black wire). Turn door key cylinder switch to OFF (neutral) position. Continuity should not be present at any terminal. Replace door lock key cylinder if continuity is not as specified.