FixVault
Home › Mitsubishi › 2003 › Lancer Evolution › Repair and Diagnosis › External Pages › Different variant/trim › Section 11 (Simplified Wiring System (SWS) - Except Evolution) › On-Vehicle Service › Adjustment Procedures Of SWS Function (Vehicles With Keyless Entry System) › Entry Conditions For The Adjustment Mode

Entry Conditions For The Adjustment Mode

WARNING: This page is about a different variant/trim than selected.
  1. Set switches to the following conditions:

    • Hazard Warning Light Switch

      OFF

    • Diagnosis Control

      ON (Connect scan tool MB991502 to the data link connector, or connect the data link connector terminal No. 1 to ground.)

    • Key Reminder Switch

      OFF (insert the ignition key)

    • Ignition Switch

      "LOCK" (OFF)

    • Driver's Door Switch

      OFF (driver's door closed)
  2. If the windshield washer switch remains on for 10 seconds or more, the tone alarm incorporated in the ETACS-ECU sounds once, and then enter the adjustment mode.
About FixVault