Release Conditions For The Adjustment Mode

WARNING: This page is about a different variant/trim than selected.

The adjustment mode will be released under one of the following conditions:

Diagnosis control: ON (Disconnect scan tool MB991502 from the data link connector, or disconnect the data link connector terminal No. 1 from ground.)
Key reminder switch: ON (ignition key removed)
Ignition switch: Turn to the positions other than "LOCK" (OFF).
Driver's door switch: ON (driver's door opened)
After 3 minutes while the adjustment is not made (If any adjustment has been made within the 3-minute period, cancel or complete the operation, and then release the adjustment mode within 3 minutes).
When any other warning tone alarms sound