FixVault

Service Data Check: ETACS-Ecu

WARNING: This page is about a different variant/trim than selected.
Checking Service Data (ETACS-ECU)

CHECK ITEM ITEM NO. DISPLAY ON SCAN TOOL CHECK CONDITION NORMAL CONDITION
Tone alarm 43 BUZZER
  1. 1. Ignition switch: LOCK (OFF)
  2. 2. Key reminder switch: ON
  3. 3. Front door switch: ON (front door open)
ON
When requirements for sounding each warning tone alarm are not satisfied OFF
Front door switch 32 FRONT DOOR SW Front door switch (right or left): right or left door switch is on (right or left front door is open) ON
Front door switches (right and left): both right and left door switches are off (both right and left front doors are closed) OFF
Headlight automatic shutdown function 35 H/L AUTO-CUT
  1. 1. Lighting switch: Other than OFF
  2. 2. Ignition switch: from ON or START to LOCK (OFF) or ACC
  3. 3. Front door switch: ON (front door open)
OFF to ON (after approximately one second)
When requirements for the headlight automatic shutdown are not satisfied OFF
Ignition switch (IG1) 30 IGSW (IG1) Ignition switch: ON or START ON
Ignition switch: LOCK (OFF) or ACC OFF
Ignition switch (ACC) 31 IG SW (ACC) Ignition switch: ACC or ON ON
Ignition switch: LOCK (OFF) or START OFF
Park/neutral switch ("R" position) 41 PNP SW (R) Park/Neutral position switch: R position ON
Park/Neutral position switch: Other than R position OFF
Windshield intermittent wiper interval 37 INT WIPE TIME
  1. 1. Ignition switch: ACC or ON
  2. 2. Operate the intermittent wiper adjusting knob, and change the wiper interval
The scan tool displays intermittent wiper interval in response to the intermittent wiper adjusting knob positions
NOTE: For item number 43, the scan tool also display "ON" when the light reminder tone alarm or R (reverse) position warning tone alarm is triggered.