FixVault
Home › Mitsubishi › 2003 › Lancer Evolution › Repair and Diagnosis › General Information › OBD-II Drive Cycles › Drive Cycle Procedures › 2001 Montero › Pattern 15 › Test Procedure

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle for 15 minutes. (During the monitor)
  3. Turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
About FixVault