FixVault
Home › Mitsubishi › 2003 › Lancer Evolution › Repair and Diagnosis › General Information › OBD-II Drive Cycles › Drive Cycle Procedures › 2011-12 OUTLANTER 3.0L › Pattern 19 › Test Procedure

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle for 40 seconds.
  3. Drive the engine at more than 5,200 r/min for 5 seconds. (During the monitor)
  4. Turn the ignition switch to "LOCK" (OFF) position.
  5. Start the engine and do Steps 1 to 4 again.
  6. Confirm that the diagnostic trouble code (DTC) is not output.
About FixVault