Fuel Level Sensor Check: Thermistor
WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After finishing this test, wipe the unit dry and install it in the fuel tank.
- Connect the fuel level sensor (thermistor) to the battery via a test light (12V 3.4W). Immerse in water.
- Condition is good if the light goes off when the thermistor is immersed in water and comes on when it is taken out of water.
- If all check result are correct, the fuel level sensor is OK. If either check result is not correct, replace the fuel level sensor.