FixVault

Column Switch

WARNING: This page is about a different car, the 2004 Mitsubishi Eclipse. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Column Switch Connector Terminals
G03474543Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
COLUMN SWITCH CONNECTOR TERMINALS NORMAL VALUE

TERMINAL INSPECTION ITEM INSPECTION CONDITION NORMAL VALUE
1 Battery power supply Always Battery positive voltage
2 Input of data request signal Always 0 - 12 V (pulse signal)
3 SWS communication line Always 0 - 12 V (pulse signal)
4 Ground Always 0 V
6 Output of signal from windshield intermittent wiper interval adjusting knob Igniting switch: "ACC," Windshield intermittent wipe interval adjusting knob: "FAST" --> "SLOW" 0 --> 2.5 V
8 Output of backup signal from windshield wiper switch Windshield low-speed wiper switch or windshield high-speed wiper switch: ON 0V
9 Power supply to ignition switch (IG1) Ignition switch: "ON" Battery positive voltage
10 Output of backup signal from headlight switch Ignition switch: "ON," Headlight switch: ON 0V