Section 58 (Simplified Wiring System (SWS) - Lancer SPORTBACK)
WARNING: This page is about a different variant/trim than selected.
- General Description
- Communication Method
- Operation
- Special Tools
- SWS Diagnosis
- Symptom Procedures
- Ecu Communication
- Inspection Procedure A-1: Communication With The SWS Monitor Kit Is Not Possible.
- Inspection Procedure A-2: Communication With The Column Switch (Column-Ecu) Is Not Possible.
- Inspection Procedure A-3: Communication With The ETACS-Ecu Is Not Possible.
- Inspection Procedure A-4: Communication With The Front-Ecu Is Not Possible
- Tone Alarm
- General Description The Concerning Tone Alarm
- General Circuit Diagram For The Ignition Key Reminder Tone Alarm Function
- General Circuit Diagram For The Light Reminder Tone Alarm Function
- General Circuit Diagram For The Seat Belt Tone Alarm Function
- Inspection Procedure B-1: Tone Alarm: Ignition Key Reminder Tone Alarm Function Does Not Work Normally.
- Inspection Procedure B-2: Tone Alarm: Light Reminder Tone Alarm Function Does Not Work Normally.
- Inspection Procedure B-3: Tone Alarm: Seat Belt Tone Alarm Function Does Not Work Normally.
- Central Door Locking System
- General Description Concerning The Central Door Locking System
- General Circuit Diagram For The Central Door Locking System
- Inspection Procedure C-1: Central Door Locking System: The Central Door Lock System Does Not Work At All.
- Inspection Procedure C-2: Central Door Locking System: Some Doors Do Not Lock Or Unlock.
- Inspection Procedure C-3: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Switch Operation.
- Inspection Procedure C-4: Central Door Locking System: All The Doors Do Not Lock Or Unlock With Just The Door Lock Key Cylinder Key Operation.
- Power Windows
- General Description Concerning The Power Windows
- Power Window Main Switch Function
- Power Window Sub Switch Function
- Power Window Timer Function
- General Circuit Diagram For The Power Windows
- Inspection Procedure D-1: Power Windows: Power Windows Do Not Work At All.
- Inspection Procedure D-2: Power Windows: The Power Window Timer Function Does Not Work Normally
- Inspection Procedure D-3: Power Windows: Only Front Door Window (LH) Does Not Work Normally By Operating The Power Window Main Switch.
- Inspection Procedure D-4: Power Windows: Power Windows Does Not Work Normally By Operating The Front Passenger's And Rear Passenger's Sub Switches.
- Inspection Procedure D-5: Power Windows: Front Or Rear Passenger's Power Windows Do Not Work At All By Operating The Power Window Main Switch.
- Keyless Entry System
- General Description Concerning The Keyless Entry System
- General Circuit Diagram For The Keyless Entry System
- Inspection Procedure E-1: Keyless Entry System: Keyless Entry System Does Not Operate.
- Inspection Procedure E-2: Keyless Entry System: The Dome Light, The Turn-Signal Lights And The Horn Do Not Operate Through The ANSWERBACK Function.
- Inspection Procedure E-3: Keyless Entry System: Encrypted Code Cannot Be Registered.
- Windshield Wiper And Washer
- General Description Concerning The Windshield Wiper And Washer
- General Circuit Diagram For The Windshield Wiper And Washer
- Inspection Procedure F-1: Windshield Wiper And Washer: Windshield Wipers Does No Not Work At All.
- Inspection Procedure F-2: Windshield Wiper And Washer: The Windshield Wipers Do Not Work When The Windshield Wiper Switch Is At "Int" Or "Mist" Position Or The Windshield Washer Switch Is At "On" Position. However, The Wipers Work At Low Speed When The Windshield Wiper Switch Is At "Lo" Or "Hi."
- Inspection Procedure F-3: Windshield Wiper And Washer: Any Of The Windshield Wiper Switch Positions Is Defective.
- Inspection Procedure F-4: Windshield Wiper And Washer: The Windshield Wipers Does Not Stop At The Predetermined Park Position.
- Inspection Procedure F-5: Windshield Wiper And Washer: The Windshield Intermittent Wiper Interval Is Not Changed By Operating The Windshield Intermittent Wiper Interval Adjusting Knob Or According To The Vehicle Speed.
- Inspection Procedure F-6: Windshield Wiper And Washer: The Windshield Intermittent Wiper Interval Is Not Changed According To The Vehicle Speed.
- Inspection Procedure F-7: Windshield Wiper And Washer: Windshield Washer Does Not Work.
- Rear Wiper And Washer
- General Description Concerning The Rear Wiper And Washer
- General Circuit Diagram For Rear Wiper And Washer
- Inspection Procedure G-1: Rear Wiper And Washer: Rear Wiper Does Not Work At All.
- Inspection Procedure G-2: Rear Wiper And Washer: Rear Wiper Does Not Stop At The Predetermined Park Position.
- Inspection Procedure G-3: Rear Wiper And Washer: When The Selector Lever Is Moved To "R" Position During The Rear Wiper Operation, The Rear Wiper Does Not Operate At The Continuous Mode.
- Inspection Procedure G-4: Rear Wiper And Washer: Rear Washer Does Not Operate.
- Seat Belt Warning Light
- Headlight And Taillight
- General Description Concerning The Headlight And Taillight
- General Circuit Diagram For The Taillight
- General Circuit Diagram For The Headlight
- General Circuit Diagram For The Daytime Running Light
- Inspection Procedure I-1: Headlight And Taillight: Taillights Does Not Illuminate Normally.
- Inspection Procedure I-2: Headlight And Taillight: Headlights (Low-Beam) Do Not Illuminate Normally.
- Inspection Procedure I-3: Headlight And Taillight: Headlights (High-Beam) Do Not Illuminate Normally.
- Inspection Procedure I-4: Headlight And Taillight: When The Passing Switch Is Turned "On", The Headlights (Low-Beam Or High-Beam) Do Not Illuminate.
- Inspection Procedure I-5: Headlight And Taillight: Headlights Do Not Illuminate When The Lighting Switch Is At "Auto," "Tail," And "Passing" Position, But Illuminate At Low-Beam When The Switch Is At "Head" Position, At This Position, The Headlights Cannot Be Changed Into High Beam By Operating The Dimmer Switch.
- Inspection Procedure I-6: Headlight And Taillight: Any Of Taillights, The Position Lights, The Side Marker Lights Or The License Plate Lights Do Not Illuminate.
- Inspection Procedure 1-7: Headlight And Taillight: One Of The Headlights Does Not Illuminate.
- Inspection Procedure I-8: Headlight And Taillight: The High-Beam Indicator Light Does Not Illuminate.
- Inspection Procedure I-9: Headlight And Taillight: Headlight Automatic Shutdown Function Does Not Work Normally.
- Inspection Procedure I-10: Headlight And Taillight: Headlight Dimmer Switch Automatic Resetting Function Does Not Work Normally.
- Inspection Procedure I-11: Headlight And Taillight: Daytime Running Light Function Does Not Work Normally. < Vehicles With Daytime Running Light Function>
- Fog Light
- General Description Concerning Fog Light
- General Circuit Diagram For The Fog Lights
- Inspection Procedure J-1: Fog Light: Fog Lights Do Not Illuminate When The Fog Light Switch Is Turned On.
- Inspection Procedure J-2: Fog Light: Fog Lights Do Not Go Out When The Headlights (Low-Beam) Are Turned Off While The Fog Lights Are On.
- Inspection Procedure J-3: Fog Light: One Of The Fog Lights Does Not Illuminate.
- Flasher Timer
- General Description Concerning The Flasher Timer
- General Circuit Diagram For The Turn Signal Light And Hazard Light
- Inspection Procedure K-1: Flasher Timer: Turn-Signal Lights Does Not Flash When The Turn-Signal Light Switch Is Turned On.
- Inspection Procedure K-2: Flasher Timer: Hazard Warning Lights Do Not Flash When The Hazard Warning Light Switch Is Turned On.
- Inspection Procedure K-3: Flasher Timer: The Right Or Left Turn-Signal Light Does Not Illuminate.
- Interior Light
- General Description Concerning The Interior Light
- General Circuit Diagram For The Interior Light
- Inspection Procedure L-1: Interior Light: The Dome Light And Luggage Area Light Do Not Illuminate Or Go Out Normally.
- Inspection Procedure L-2: Interior Light: The Dome Light Or Luggage Area Light Does Not Illuminate Or Go Out Normally.
- Inspection Procedure L-3: Interior Light: Dome Light And Luggage Area Light Dimming Function Does Not Work Normally.
- Inspection Procedure L-4: Interior Light: The Interior Light Automatic Shut-Down Function Does Not Work Normally.
- Inspection Procedure L-5: Interior Light: The Door Ajar Indicator Lights Do Not Illuminate Or Go Out Normally.
- Ecu Communication
- Input Signal Procedures
- Inspection Procedure M-1: ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (Acc).
- Inspection Procedure M-2: ETACS-Ecu Does Not Receive Any Signal From The Ignition Switch (IG1).
- Inspection Procedure M-3: ETACS-Ecu Does Not Receive "R" Position Signal From The Transmission Range Switch.
- Inspection Procedure M-4: ETACS-Ecu Does Not Receive Signals From The Front Door Switches.
- Inspection Procedure M-5: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Taillight Switch, The Headlight Switch, The Passing Light Switch, The Dimmer Switch, The Turn-Signal Light Switch Or Switch.
- Inspection Procedure M-6: Column Switch: ETACS-Ecu Does Not Receive Any Signal From Windshield Mist Wiper Switch, Windshield Intermittent Wiper Switch, Windshield Low-Speed Wiper Switch, Windshield High-Speed Wiper Switch, Windshield Washer Switch, Rear Wiper Switch Or Rear Washer Switch.
- Inspection Procedure M-7: Column Switch: ETACS-Ecu Does Not Receive Any Signal From The Windshield Intermittent Wiper Interval Adjusting Knob.
- Inspection Procedure M-8: ETACS-Ecu Does Not Receive Signals From The Fog Light Switch.
- Inspection Procedure N-1: ETACS-Ecu Does Not Receive Any Signal From The Key Reminder Switch.
- Inspection Procedure N-2: ETACS-Ecu Does Not Receive Any Signal From The Hazard Warning Light Switch.
- Inspection Procedure N-3: ETACS-Ecu Does Not Receive Any Signal From The Driver's Seat Belt Switch.
- Inspection Procedure N-4: ETACS-Ecu Does Not Receive Any Signal From All The Door Switches.
- Inspection Procedure N-5: ETACS-Ecu Does Not Receive Any Signal From The Driver's Door Lock Key Cylinder Switch
- Inspection Procedure N-6: ETACS-Ecu Does Not Receive Any Signal From The Driver's Door Lock Actuator Switch.
- Inspection Procedure N-7: ETACS-Ecu Does Not Receive Any Signal From The Door Lock Switch (Incorporated In The Power Window Main Switch).
- Inspection Procedure N-8: ETACS-Ecu Does Not Receive Vehicle Speed Signal.
- Inspection Procedure N-9: Transmitter: ETACS-Ecu Does Not Receive Any Signal From The Lock Or Unlock Switch.
- Inspection Procedure N-10: ETACS-Ecu Does Not Receive Any Interior Light Loaded Signal.
- Check At Ecu Terminal
- On-Vehicle Service