FixVault
Home › Mitsubishi › 2004 › Lancer Evolution › Repair and Diagnosis › General Information › OBD-II Drive Cycles › Drive Cycle Procedures › 2011-12 Lancer 2.0L Turbo › Pattern 20 › Test Procedure

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the engine at 1,200 - 1,500 r/min for 30 seconds. (During the monitor)
  3. Turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
About FixVault