Rear Wheel Alignment Check And Adjustment: Toe-In
- Standard value: 3 +/- 2 mm (0.12 +/- 0.07 inch)
It toe-in is not within the standard value, adjust by following procedures.
- Be sure to adjust the camber before making toe adjustment.
- Carry out adjustment by turning the toe adjusting bolt (assist link mounting bolt which is located on the inner side of the body).
- Left wheel: Turning clockwise (+) toe-in
- Right wheel: Turning clockwise (-) toe-in
NOTE:
The scale has gradations of approximately 3.3 mm (0.13 inch) (single side toe angle equivalent to 19').