FixVault
Home › Mitsubishi › 2005 › Endeavor LS, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Diagnosis › Automatic Transaxle Diagnosis › How To Initialize A/T Learning Value › Initialization Procedure

Initialization Procedure

  1. Shift the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position. Then, connect the MUT-III to the diagnosis connector.
  2. Initialize the learned value on the initialization screen.
  3. After this initialization, make the system learn the idling in accordance with "Learning procedure for idling in MPI engine" (Refer to PRECAUTIONS BEFORE SERVICE ).
About FixVault