General -- Except Evolution

• General
• How To Use This Manual
  • Maintenance, Repair And Servicing Explanations
  • On-Vehicle Service
  • Service Procedures
  • Definition Of Terms
    • Standard Value
    • Limit
    • Reference Value
    • Danger, Warning, And Caution
    • Tightening Torque Indication
  • Special Tool Note
  • Abbreviations
  • Explanation Of Manual Contents
• Troubleshooting Guidelines
  • Verify The Complaint
  • Determine Possible Causes
  • Find The Problem
  • Repair The Problem
  • Verify The Repair
• How To Use Troubleshooting/Inspection Service Points
  • Troubleshooting Contents
  • Standard Flow Of Diagnostic Troubleshooting
  • System Operation And Symptom Verification Tests
  • Diagnostic Function
  • Diagnostic Trouble Code Chart
  • Symptom Chart
  • Diagnostic Trouble Code Procedures
  • Symptom Procedures
  • Service Data Reference Table
  • Check At Ecu Terminals
  • Terminal Voltage Checks
  • Terminal Resistance And Continuity Checks
  • Inspection Procedures Using An Oscilloscope
  • How To Use The Inspection Procedures
  • Harness Inspection
  • Measures To Take After Replacing The Ecu
  • Connector Measurement Service Points
  • If Inspecting With The Connector Connected < Waterproof Connectors >
  • If Inspecting With The Connector Connected < Ordinary (Non-Waterproof) Connectors >
  • If Inspecting With The Connector Disconnected < When Inspecting A Female Pin >
  • If Inspecting With The Connector Disconnected < When Inspecting A Male Pin >
  • Connector Inspection Service Points
    • Visual Inspection
  • Connector Pin Inspection
  • Connector Engagement Inspection
  • How To Cope With Intermittent Malfunctions
  • To Cope With Intermittent Malfunction
    • Ask The Customer About The Malfunction
    • Determine The Conditions From The Customer's Responses
    • Use Simulation Test
    • Verify The Intermittent Malfunction Is Eliminated
  • Simulation Tests
  • Inspection Service Points For A Blown Fuse
• Vehicle Identification
  • Vehicle Identification
    • Vehicles Identification Number Location
    • Vehicle Identification Code Chart Plate
    • Vehicle Identification Number List
      • Vehicles For USA
        • Vehicles For Federal Emission Regulation
        • Vehicles For CALIFORNIA Emission Regulation
      • Vehicles For CANADA
      • Vehicles For PUERTO RICO
  • Vehicle Identification Code Plate
    • Notes
    • Vehicle Safety Certification Label
    • Engine Model Stamping
    • Theft Protection
      • Notes
      • Locations
• Precautions Before Service
  • Supplemental Restraint System (SRS)
  • How To Perform Vehicle Identification Number (VIN) Writing
    • Notes
    • Writing Procedure
  • Initialization Procedure For Learning Value In MFI Engine
    • Notes
    • Initialization Procedure
  • Learning Procedure For Idling In MFI Engine
    • Purpose
    • Learning Procedure
  • Servicing Electrical System
  • Vehicle Washing
  • Application Of Anti-Corrosion Agents And Undercoats
  • Scan Tool (Mut-III Sub Assembly)
• Towing And Hoisting
  • Wrecker Towing Recommendation
    • Front Towing Pickup
    • Rear Towing Pickup
  • Towing When Keys Are Not Available
  • Safety Precautions
  • Lifting, Jacking Support Location
  • Floor Jack
  • Axle Stands And A Single-Post Lift Or Double-Post Lift
    • Notes
    • Axle Stands
  • Plate Type Lift
• General Data And Specifications
  • Notes
  • General Specifications < Vehicles For USA >
  • General Specifications < Vehicles For CANADA >
  • General Specifications < Vehicles For PUERTO RICO >
• Tightening Torque
  • Notes
  • Standard Bolt And Nut Tightening Torque
  • Flange Bolt And Nut Tightening Torque
• Lubrication And Maintenance
  • Notes
  • Maintenance Schedules
  • Severe Service
  • Engine Oil
  • Lubricants And Greases
  • Fuel Usage Statement
  • Gasoline Containing Alcohol
  • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
  • Materials Added To Fuel
• Recommended Lubricants And Lubricant Capacities Table
  • Recommended Lubricants
  • Lubricant Capacity Table
  • Lubricant Selection
    • Engine Oil
    • Oil Viscosity
  • Selection Of Coolant
    • Coolant
• Scheduled Maintenance Table
  • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
  • General Maintenance Service For Proper Vehicle Performance
  • Scheduled Maintenance Under Severe Usage Conditions
• Maintenance Service
  • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
  • 2. Fuel Hoses (Check Condition)
  • 3. Air Cleaner Element (Replace)
  • 4. Evaporative Emission Control System (Except Evaporative Emission Canister) (Check For Clogging)
  • 5. Spark Plugs (Replace)
  • 6. Intake And Exhaust Valve Clearance (Inspect And Adjust)
  • 7. Timing Belt (Replace)
    • Notes
    • < 2.0L Engine >
    • < 2.4L Engine >
  • 8. Drive Belt (For Generator, Power Steering Oil Pump And A/C Compressor) (Check Condition)
    • Generator Drive Belt Tension Check < 2.0L Engine >
      • < When Using Scan Tool MB991958 >
      • < When Using The Tension Gauge >
      • < Belt Deflection Check >
    • Generator Drive Belt Tension Adjustment < 2.0L Engine >
    • Power Steering Oil Pump And A/C Compressor Drive Belt Tension Check And Adjustment < 2.0L Engine >
      • Notes
      • < When Using Scan Tool MB991958 >
      • < When Using A Tension Gauge >
      • < Belt Deflection Check >
    • Drive Belt Tension Check < 2.4L Engine >
  • 9. Exhaust System (Connections, Pipes And Converter Heat Shields) (Check And Service As Required)
  • 10. Engine Oil (Change)
  • 11. Engine Oil Filter (Replace)
    • Notes
    • Engine Oil Filter Selection
    • Oil Filter Replacement
  • 12. Manual Transaxle Oil
    • Check oil level
    • Change oil
  • 13. Automatic Transaxle Fluid
    • Checking A/T Fluid Level
    • Change A/T Fluid
  • 14. Engine Coolant (Change)
    • Notes
    • Changing Coolant
  • 15. Disc Brake Pads (Inspect For Wear)
  • 16. Rear Drum Brake Linings And Rear Wheel Cylinders (Inspect For Wear And Leaks)
  • 17. Brake Hoses (Check For Deterioration Or Leaks)
  • 18. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
  • 19. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
  • 20. SRS Air Bag (Inspect For SRS System)
    • Notes
    • SRS Warning Light Check
    • SRS Component Visual Check
    • Side Impact Sensors
    • Replace The Side Impact Sensor If It Fails The Visual Check
    • SRS Air Bag Control Unit (SRS-Ecu)
    • Air Bag Module, Steering Wheel And Clock Spring
    • Front Seatback Assembly With Side-Airbag Module
    • Seat Belt With Pre-TENSIONER
    • Wiring Harness
  • 21. Tires (Rotate)
• Main Sealant And Adhesive Table