FixVault
Home › Mitsubishi › 2005 › Lancer Evolution › Repair and Diagnosis › Transmission › Manual Trans › On-Vehicle Service - Evolution › On-Vehicle Service › Transfer Oil Replacement

Transfer Oil Replacement

  1. Remove the filler plug.
  2. Remove the drain plug and drain the oil.
  3. Tighten the drain plug to the specified torque.
    1. Tightening torque: 32 +/- 2 N.m (23 +/- 2 ft-lb) 
  4. Fill with MITSUBISHI limited slip differential oil (LSD) or equivalent until the level comes to the lower portion of filler plug hole.
    1. Quantity: 0.6 dm 3  (0.63 quart) 
  5. Tighten the filler plug to the specified torque.
    1. Tightening torque: 32 +/- 2 N.m (23 +/- 2 ft-lb) 
    Fig 1: Identifying Drain And Filler Plugs
    G02486284Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
About FixVault