Auto-Cruise Control Setting
WARNING: This page is about a different car, the 2006 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
- Switch "ON" the main switch.
- Drive at the desired speed, above approximately 40 km/h. (25 mph)
- Push the auto-cruise control switch in the direction of arrow shown in illustration.
- Check to be sure that when the switch is released the speed is the desired constant speed.NOTE: If the vehicles speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, the auto-cruise control will be cancelled.