Service Specifications
WARNING: This page is about a different car, the 2006 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |||
|---|---|---|---|---|---|
| Brake pedal height mm (in) | 192 - 195 (7.6 - 7.7) | - | |||
| Brake pedal play mm (in) | 3 (0.1) or less | - | |||
| Brake pedal to floor board clearance when the brake pedal is depressed mm (in) < Pedal depression force: Approximately 500 N (112 lb) > |
90 (3.5) or more | - | |||
| Hydraulic brake booster (HBB) | Pump motor operating time: seconds | When brake fluid pressure is not applied to power supply system | 20 - 80 | - | |
| With power assist | 2 - 11 | - | |||
| Hydraulic pressure generated at test without booster: kPa (psi) | Depressing force 100 N (22 lb) | Front | 600 (87) or more | - | |
| Rear | 0 (0) | - | |||
| Depressing force 500 N (112 lb) | Front | 4,500 (653) or more | - | ||
| Rear | 0 (0) | - | |||
| Hydraulic pressure generated at test with booster: kPa (psi) | Depressing force 100 N (22 lb) | Front | 3,000 - 4,000 (435 - 580) |
- | |
| Rear | 3,300 - 4,300 (479 - 624) |
- | |||
| Depressing force 200 N (45 lb) | Front | 8,000 - 10,000 (1,160 - 1,450) |
- | ||
| Rear | 8,000 - 10,000 (1,160 - 1,450) |
- | |||
| Hydraulic pressure generated at test with booster: kPa (psi) | Depressing force 400 N (90 lb) | Front | 14,000 - 18,000 (2,030 - 2,611) |
- | |
| Rear | 14,000 - 18,000 (2,030 - 2,611) |
- | |||
| Depressing force 500 N (112 lb) | Front | 15,000 - 19,000 (2,175 - 2,756) |
- | ||
| Rear | 15,000 - 19,000 (2,175 - 2,756) |
- | |||
| Front disc brake | Pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) | ||
| Disc thickness mm (in) | 26.0 (1.02) | Minimum 24.4 (0.96) | |||
| Disc run-out mm (in) | - | 0.06 (0.002) | |||
| Drag force N (lb) | 55 (12) | - | |||
| Rear disc brake | Pad thickness mm (in) | 10.0 (0.39) | Minimum 2.0 (0.08) | ||
| Disc thickness mm (in) | 22.0 (0.87) | Minimum 20.4 (0.80) | |||
| Disc run-out mm (in) | - | 0.06 (0.002) | |||
| Drag force N (lb) | 55 (12) | - | |||
| Front hub end play mm (in) | - | 0 (0) | |||
| Rear hub end play mm (in) | - | 0 (0) | |||