Service Specifications
WARNING: This page is about a different car, the 2006 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | ||
|---|---|---|---|---|
| Wheel bearing axis backlash mm (in) | - | 0 (0) | ||
| Front axle total backlash mm (in) | - | 11 (0.4) | ||
| Solenoid valve resistance [at 20°C (68°F)] Ω | 36 - 46 | - | ||
| Hub rotation starting torque N.m (in-lb) | - | 1.75 (15.48) | ||
| Setting of DOJ boot length mm (in) | 80 +/- 5 (3.2 +/- 0.1) | - | ||
| Opening dimension of the special tool (MB991561) mm (in) | When the BJ boot band (small) is crimped | 2.9 (0.11) | - | |
| When the BJ boot band (large) is crimped | 3.2 (0.13) | - | ||
| Crimped width of the BJ boot band mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | ||
| Crimped height of BJ boot band (larger) mm (in) | - | 9.5 (0.37) | ||
| Final drive gear backlash mm (in) | 0.11 - 0.16 (0.004 - 0.006) | - | ||
| Drive gear runout mm (in) | - | 0.05 (0.002) | ||
| Differential gear backlash mm (in) | 0 - 0.076 (0 - 0.0030) | 0.2 (0.007) | ||
| Drive pinion turning torque N.m (in-lb) | Without oil seal | 0.83 - 1.19 (7.35 - 10.53) | - | |
| With oil seal | With anti-rust agent | 0.93 - 1.28 (8.24 - 11.32) | - | |
| With gear oil applied | 0.97 - 1.32 (8.59 - 11.68) | - | ||
| Main shaft assembly and clutch gear clearance mm (in) | 0.05 - 0.3 (0.002 - 0.012) | - | ||