Pad Wear Check
WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Always replace both brake pads on each wheel as a set (both front wheels or both rear wheels). Failure to do so will result in uneven braking, which may cause unreliable brake operation.
- If there is significant difference in the thickness of the pads on the left and right sides, check the sliding condition of the piston and slide pins.
- Measure thickness at the thinnest and most worn area of the pad.
- Standard value: 10 mm (0.39 inch)
- Minimum limit: 2.0 mm (0.08 inch)
- Replace the pad assembly if pad thickness is less than the limit value.