Scan Tool Or Voltmeter
If a problem is found in the Pulse Check, observe the table below.
SCAN TOOL OR VOLTMETER REFERENCE
| SYMPTOM | INSPECTION PROCEDURE | |
|---|---|---|
| ETACS-ECU does not receive any signal from the key reminder switch. | N-1 | |
| ETACS-ECU does not receive any signal from the hazard warning light switch. | N-2 | |
| ETACS-ECU does not receive any signal from the door lock key cylinder switch. | N-3 | |
| ETACS-ECU does not receive any signal from the door lock actuator. | N-4 | |
| ETACS-ECU does not receive any signal from the door lock switch (incorporated in the power window main switch and power window sub switch). | N-5 | |
| ETACS-ECU does not receive any signal from the liftgate latch switch. | N-6 | |
| ETACS-ECU does not receive any signal from the liftgate lock release switch. | N-7 | |
| Transmitter | ETACS-ECU does not receive any signal from the lock, unlock, liftgate or panic switch. | N-8 |
| ETACS-ECU does not receive any interior light loaded signal. | N-9 | |
| ETACS-ECU does not receive an auto-stop signal from the rear wiper motor. | N-10 | |