Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Cylinder block drain plug < 2.0L ENGINE > | 40+/-5 N.m (30+/-3 ft-lb) |
| Cylinder block drain plug < 2.4L ENGINE > | 44+/-5 N.m (33+/-3 ft-lb) |
| Radiator | |
| Upper insulator bolt | 12+/-2 N.m (102+/-22 in-lb) |
| Thermostat | |
| Control wiring harness connection bracket bolt < 2.4L ENGINE > | 11+/-1 N.m (98+/-8 in-lb) |
| Water inlet fitting bolt < 2.0L ENGINE > | 19+/-1 N.m (14+/-1 ft-lb) |
| Water inlet fitting bolt < 2.4L ENGINE > | 13+/-2 N.m (111+/-22 in-lb) |
| Water hose and water pipe < 2.0L ENGINE > | |
| Ground cable bolt | 10+/-2 N.m (89+/-17 in-lb) |
| Thermostat case assembly bolt | 24+/-1 N.m (18 +/-4 1 ft-lb) |
| Water inlet pipe assembly bolt | 14+/-1 N.m (120+/-13 in-lb) |
| Water outlet fitting bolt | 14+/-1 N.m (120+/-13 in-lb) |
| Water hose and water pipe < 2.4L ENGINE > | |
| Control wiring harness connection bracket bolt | 11+/-1 N.m (98+/-8 in-lb) |
| Radiator hose clamp bolt | 5.0+/-1.0 N.m (44+/-9 in-lb) |
| Thermostat case assembly bolt | 24+/-4 N.m (18+/-3 ft-lb) |
| Water inlet pipe assembly bolt | 13+/-2 N.m (111+/-22 in-lb) |
| Water outlet fitting bolt | 13+/-2 N.m (111+/-22 in-lb) |
| Water pump < 2.0L ENGINE > | |
| Timing belt rear upper cover connection bolt | 11+/-1 N.m (98+/-8 in-lb) |
| Water pump bolt | 23+/-3 N.m (17+/-2 ft-lb) |
| Water pump < 2.4L ENGINE > | |
| Water pump bolt | 14+/-1 N.m (120+/-13 in-lb) |