Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION | |
|---|---|---|
| Clutch control | Clutch release cylinder mounting bolt | 18 +/- 3 N.m (13 +/- 2 ft-lb) |
| Clutch orifice assembly mounting bolt | 18 +/- 3 N.m (13 +/- 2 ft-lb) | |
| Clutch master cylinder mounting nut | 12 +/- 2 N.m (102 +/- 22 in-lb) | |
| Clutch pipe flare nut | 15 +/- 1 N.m (11 +/- 1 ft-lb) | |
| Eye bolt | 30 +/- 4 N.m (22 +/- 3 ft-lb) | |
| Pushrod jam nut | 13 +/- 2 N.m (111 +/- 22 in-lb) | |
| Retainer plate nut | 12 +/- 2 N.m (102 +/- 22 in-lb) | |
| Clutch pedal | Clutch master cylinder mounting nut | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Clutch pedal assembly mounting bolt | 12 +/- 2 N.m (102 +/- 22 in-lb) | |
| Clutch pedal position switch setting nut | 12 +/- 2 N.m (109 +/- 21 in-lb) | |