FixVault
Home › Mitsubishi › 2006 › Lancer Evolution › Repair and Diagnosis › General Information › OBD-II Drive Cycles › Drive Cycle Procedures › 2011-12 OUTLANTER 3.0L › Pattern 22 › Test Procedure

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle at the engine speed less than 1,000 r/min for 15 seconds. (During the monitor)
  3. Turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
About FixVault