Adjustment Procedures Of SWS: Notes

FUNCTION < Vehicles with keyless entry system >

Required Special Tools:

MB991223: Harness Set
MB991958: Scan Tool (MUT-III Sub Assembly)
- MB991824: Vehicle Communication Interface (V.C.I.)
- MB991827: MUT-III USB Cable
- MB991911: MUT-III Main Harness B
MB991529: Diagnostic Trouble Code Check Harness

The following functions can be enabled or disabled by operating input switches in a special manner. This set mode is stored after the battery is disconnected.

Keyless entry hazard answerback function
Headlight automatic shutdown function
Initialization of above mentioned functions

NOTE: The keyless entry hazard answerback can be also adjusted by operating the RKE transmitter. (however, this adjustment can be done more easily by operating the transmitter.) Refer to ENABLING/DISABLING THE ANSWERBACK FUNCTION .