Section 24 (Front Axle)
WARNING: This page is about a different car, the 2005 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
- General Description
- Front Axle Diagnosis
- Introduction To Front Axle Diagnosis
- Front Axle Diagnostic Troubleshooting Strategy
- Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: Does not Lock
- INSPECTION PROCEDURE 2:Locks but does not Become Free
- INSPECTION PROCEDURE 3: Noise during Wheel Rotation
- INSPECTION PROCEDURE 4:Noise Due to Excessive Wheel Play in Turning Direction
- INSPECTION PROCEDURE 5: Constant Noise
- INSPECTION PROCEDURE 6: Gear Noise while Driving
- INSPECTION PROCEDURE 7: Gear Noise while Coasting
- INSPECTION PROCEDURE 8: Bearing Noise while Driving or Coasting
- INSPECTION PROCEDURE 9: Noise while Turning
- INSPECTION PROCEDURE 10: Heat
- INSPECTION PROCEDURE 11: Oil Leakage
- Special Tools
- On-Vehicle Service
- Hub And Knuckle Assembly
- Drive Shaft Assembly
- Inner Shaft Assembly
- Differential Carrier And Free Wheeling Clutch
- Removal And Installation
- Inspection
- Free Wheeling Clutch Disassembly And Assembly
- Differential Carrier Disassembly
- Notes
- Disassembly Service Points
- Drive Gear Backlash
- Drive Gear RUNOUT
- Differential Gear Backlash
- Drive Gear Tooth Contact
- Notes
- << B >> Differential Case Assembly Removal
- << C >> Side Bearing Inner Race Removal
- << D >> Drive Gear Removal
- << E >> Self-Locking Nut Removal
- << F >> Drive Pinion Assembly Removal
- << G >> Drive Pinion Front Bearing Inner Race Removal
- << H >> Oil Seal/Drive Pinion Rear Bearing Inner Race/Drive Pinion Rear Outer Race Removal
- << I >> Drive Pinion Front Bearing Outer Race Removal
- << J >> Lock Pin Removal
- Assembly
- Notes
- Lubrication, Sealing And Adhesive Points
- Assembly Service Points
- >> A << Oil Seal Installation
- >> B << Drive Pinion Front Bearing Outer Race Installation
- >> C << Drive Pinion Rear Bearing Outer Race Installation
- >> D << Pinion Height Adjustment
- >> E << Drive Pinion Turning Torque Adjustment
- >> F << Differential Gear Backlash Adjustment
- >> G << Lock Pin Installation
- >> H << Drive Gear Installation
- >> I << Side Bearing Inner Race Installation
- >> J << Drive Gear Backlash Adjustment
- Solenoid Valve And Vacuum Hose
- Front Differential Mount
- Specifications