>>N<< 5TH Speed-Reverse Synchronizer Hub Installation
- Set the output shaft on the press support stand.
- Make sure that the synchronizer ring is fitted correctly on the cone of the 5th speed gear.
- Check that the 5th speed-reverse synchronizer hub is oriented correctly for installation, and fit it on the output shaft.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
- Using special tools MD98812, MD998813 and MD998819, press install the 5th speed-reverse synchronizer hub with the press.
- Make sure that the synchronizer ring on the 5th speed gear side can rotate freely.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.