Symptom Chart

CAUTION: During diagnosis, a DTC code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC code(s). If DTC code(s) are set, erase them all.

SYMPTOM CHART

SYMPTOM	INSPECTION PROCEDURE	REFERENCE
Communication with scan tool is not possible. (Middle Grade Type)	1	INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE
The multi-center display does not show any information. (Middle Grade Type)	2	INSPECTION PROCEDURE 2: THE MULTI-CENTER DISPLAY DOES NOT SHOW ANY INFORMATION. (MIDDLE GRADE TYPE)
The A/C display shows "COMMUNICATION ERROR", and then can not proceed to next screen. (Middle Grade Type)	3	INSPECTION PROCEDURE 3: THE A/C DISPLAY SHOWS "COMMUNICATION ERROR", AND THEN CAN NOT PROCEED TO NEXT SCREEN. (MIDDLE GRADE TYPE OR VEHICLES WITH MITSUBISHI MULTI COMMUNICATION SYSTEM)
The ambient air temperature display shows "COM ERROR" or "--°C (--°F)." (Middle Grade Type)	4	INSPECTION PROCEDURE 4: THE AMBIENT AIR TEMPERATURE DISPLAY SHOWS "COM ERROR" OR "--°C (--°F)." (MIDDLE GRADE TYPE OR VEHICLES WITH MITSUBISHI MULTI COMMUNICATION SYSTEM)
On the audio screen, "COMMUNICATION ERROR" can not proceed to next screen. (Middle Grade Type or Vehicles With Mitsubishi Multi Communication system)	5	INSPECTION PROCEDURE 5: ON THE AUDIO SCREEN, "COMMUNICATION ERROR" CAN NOT PROCEED TO NEXT SCREEN. (MIDDLE GRADE TYPE)
The compass can not be calibrated manually, or becomes out of calibration easily. (Middle Grade Type or Vehicles With Mitsubishi Multi Communication system)	6	INSPECTION PROCEDURE 6: THE COMPASS CAN NOT BE CALIBRATED MANUALLY, OR BECOMES OUT OF CALIBRATION EASILY (MIDDLE GRADE TYPE)