How To Set The Schedule
- Turn the ignition switch to the "OFF" position.
- By operating the meter information switch, the warning period is displayed on the multi information display.
- Press the meter information switch once for 1.2 seconds or longer.
- The service reminder indicator flashes.
- While the service reminder indicator flashes, press the meter information switch 3 times consecutively for 1.2 seconds or longer.
- The service reminder indicator is turned ON, and the current schedule is displayed on the multi information display.
- While the current schedule is displayed, press the meter information switch 3 times consecutively for less than 1.2 seconds.
- The multi information display is shifted to the schedule selection mode.
- When the meter information switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the switch is pressed for 1.2 seconds or longer, the displayed schedule is set.
- The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.SCHEDULE TABLE
Schedule Warning types Warning criteria NAS 10 (initial setting) Elapsed time (month) Every 6 elapsed months Driving distance (miles) Every 7,500 miles of driving distance Driving distance (km) Every 12,000 km of driving distance NAS 11 Elapsed time (month) Every 3 elapsed months Driving distance (miles) Every 3,750 miles of driving distance Driving distance (km) Every 6,000 km of driving distance NAS 20 Elapsed time (month) Every 5 elapsed months Driving distance (miles) Every 5,000 miles of driving distance Driving distance (km) Every 8,000 km of driving distance NAS 21 Elapsed time (month) Every 4 elapsed months Driving distance (miles) Every 3,750 miles of driving distance Driving distance (km) Every 6,000 km of driving distance